Stationary Containments

Share |


The HPE6000-3 cylinder fill enclosure fills three cylinders at a time. This enclosure provides increased safety during the fill process, only operating when the door is closed and locked. The HPE6000-3 is designed to contain the destructive force of an accidental cylinder failure or hose rupture, while allowing the air blast to be vented away from the operator.

The Class 2 Containment from HYPRES is NFPA 1901 compliant. A rupture test was performed by a third party certified licensed engineering testing facility. The rupture test followed NPFA recommended guidelines for a rupture test.

Standard Features:

  • Safety Interlock System
  • Manual ½" thick door locking bar
  • Teflon slides to protect cylinder from scuffing
  • Stainless steel gauge panel
  • (1) Adjustable pressure regulator 0 to 6000 PSI
  • Inlet and Outlet pressure gauges
  • (4) Gauges and valves for cascade storage cylinders
  • (4) Connecting hoses for storage cylinders
  • (3) Panel valves to control the fill process
  • (3) Fill gauges to monitor the fill process
  • (3) Fill hoses w/SS bleed valve & fill adapter

Construction of Fill Station:

  • Drawer contains ¼" steel plate on all four sides
  • Front of drawer contains additional ¼" steel plate
  • Outer cabinet contains ¼" steel plate on all four sides for ½" steel protection on all four sides
  • Zinc rich powder coat finish provides up to 2000 hours of protection from extreme environmental exposure


  • Remote fill outlet w/valve and gauge
  • Cascade refill port w/bleed valve
  • SCUBA yoke fill adapter
  • Access Control System

Dimensions: 38.5"W x 23.5"D x 65"H
Approx. Weight 1400lbs.

Safety Interlock System prevents SCBA or SCUBA filling unless the front access door is completely closed and locked in place. All air control components are located inside the compartment. The carriage design "tilts" toward the operator whenever the door is opened. This facilitates loading and unloading cylinders and minimizes operator fatigue.

Fabricated by an ISO 9002 Company, Laser Cut, Robot Welded and Zinc Powder-Coated. NFPA 1901-71, 23.9.1-4 CERTIFIED BY LICENSED ENGINEERING TESTING FACILITY.