Oxygen Booster Containment

HPE6550-2-OCL2-B

The HPE6550-2-OCL2-B station mount cylinder fill enclosure fill two D or E oxygen cylinders at a time.  The unit is equipped with a fully integrated oxygen cleaned booster and oxygen management panel. The booster gives the ability to retrieve virtually all the oxygen from the oxygen storage cylinders. The integration provides one single footprint.

The enclosure provides increased safety during the fill process, only operation when the door is closed and locked.  The HPE6550-2-OCL2-B is designed to contain the destructive force of an accidental cylinder failure or hose rupture, while allowing the energy blast to be vented away from the operator.

 

 

Standard Features/Oxygen-Clean:

  • Teflon Slides To Protect Cylinder from Scuffing
  • (2) Fill Hoses with Bleed Valve and Fill Adapter
  • (4) Connections for Oxygen Storage Cylinders
  • (4) 6' Hoses for Oxygen Storage Cylinders
  • (2) Panel Valves to Control Fill Process
  • Booster Integrated into system behind panel
  • Booster requires 110 volt power supply

 

Construction:

* Exterior Cabinet Contains ¼” Steel Plate On All Four Sides
* Drawer Contains ½” Steel Plate Construction & ¼” Steel on Three Sides of the Cabinet.
* Result is ½” Steel On All Four Sides
* Fabricated By ISO 90002 Company, Laser Cut, & Certified Welded
* 6 mil Zinc-Rich Primer & Powder Coat Finish
* Vented Through Rear Bottom of Cabinet
* All Control Components Located Inside Cabinet

Dimensions: 29.5"W x 23.5"D x 65"H
Approx. Weight 1000lbs.

 

OXYGEN  CLEANING

 

Hypres Equipment oxygen cleaning process follows the recommended practices for oxygen cleaning, published in the Compressed Gas Association document, CGA G-4.1 and American Society for Testing and Materials document, ASTM G 93.

 

Hypres Equipment oxygen cleaning procedure follows the recommendations published in the American Society for Testing and Materials document, ASTM G 88 and ASTM pamphlet, Design Strategies for Polymer – Lined Flex Hose Distance / Volume Pieces.

 

Safety Interlock System prevents SCBA or SCUBA filling unless the front access door is completely closed and locked in place. All air control components are located inside the compartment. The carriage design "tilts" toward the operator whenever the door is opened. This facilitates loading and unloading cylinders and minimizes operator fatigue.

Fabricated by an ISO 9002 Company, Laser Cut, Robot Welded and Zinc Powder-Coated. NFPA 1901-71, 23.9.1-4 CERTIFIED BY LICENSED ENGINEERING TESTING FACILITY.